Turning On The Flash And Firing A Test; Red-Eye Reduction - Bolt VS-260F User Manual

Turning on the Flash and Firing a Test

To turn the flash on, simply slide the power switch to the On position.
When the flash is ready to fire, the Ready light will glow red. If the flash is mounted on your camera, a flash
icon will also appear in the camera's viewfinder when you press the shutter-release button halfway.
To fire a test flash, press the Ready light / Test button.
Automatic power-saving function: After 3 minutes of inactivity, the flash will automatically enter power-
saving mode to conserve battery life. The Ready light will turn off. To reactivate the VS-260F, simply press
the Ready light / Test button or your camera's shutter-release button. During long periods of inactivity, it is
recommended that you use the power switch to turn the flash off completely.

Red-Eye Reduction

The Bolt VS-260F supports red-eye reduction. For details on how to set red-eye reduction, consult your
camera's user manual.
|
14 Turning on the Flash and Firing a Test