Table of Contents
Advertisement
1.
Position the element of your scene that you want to be correctly exposed in the center of your viewfinder.
2.
Press the FV Lock button on your camera. The flash will fire a test shot and lock its output level.
3.
Reframe your image as desired and take the shot.
For more information about the flash exposure lock feature, consult your camera's manual.
Using Flash Exposure Compensation
In automatic TTL mode, you can use flash exposure compensation to adjust the VS-510N's flash output
incrementally, just as you would adjust exposure with the exposure compensation function on your camera.
To apply flash exposure compensation, press the flash exposure compensation button on your camera and
adjust the flash exposure level up or down with your camera's controls.
The flash exposure compensation range and controls vary between different camera models. Consult your
camera's manual for more information about this feature.
Using Flash Exposure Compensation
|
21
Advertisement
Table of Contents
