Turning On The Flash And Firing A Test - Bolt VS-570C User Manual

Mounting the VS-570C on the included stand:
You can mount the VS-570C on the included stand in the same way you would mount it on your camera. This
allows you to set the flash up on a flat surface or to attach it to a tripod head, light stand, or clamp that has a
compatible 1/4"-20 screw mount.

Turning On the Flash and Firing a Test

To turn the flash on, simply slide the power switch to the On position.
When the flash is ready to fire, the Ready light will glow red. If the flash is mounted on your camera, a flash
icon will also appear in the camera's viewfinder.
To fire a test flash, press the Ready light / Test button.
Automatic power-saving function: After 3 minutes of inactivity, the flash will automatically enter power-
saving mode to conserve battery life. The LCD will display a single OFF indicator, and the Ready light will turn
off. To reactivate the VS-570C, simply press any button on the control panel, or tap your camera's shutter-
release button. During long periods of inactivity, it is recommended that you use the power switch to turn the
flash off completely.
LCD illumination: When a button is pressed, the LCD will be illuminated for about 5 seconds.
|
16 Turning on the Flash and Firing a Test