Table of Contents
Advertisement
Automatic power-saving function: After 3 minutes of inactivity, the flash will automatically enter power-
saving mode to conserve battery life. The LCD will display a single OFF indicator, and the Ready light will turn
off. To reactivate the VS-510N, simply press any button on the control panel, or tap your camera's shutter-
release button. During long periods of inactivity, it is recommended that you use the power switch to turn the
flash off completely.
LCD illumination: When a button is pressed, the LCD will be illuminated for about 5 seconds.
Important!
Make sure that the slave mode switch is set to Off when the flash is mounted on your camera. Only switch it
to the "S" position when using the flash off-camera as a wireless slave.
|
Turning on the Flash and Firing a Test
17
Advertisement
Table of Contents
