Time And Date; Setting Time And Date On The Display; Setting The Time Format; Setting The Time Manually - Motorola MTP6650 Feature User Manual

• On – To activate this feature.
• Off – To deactivate this feature.
4.10.9

Time and Date

This sub-menu controls the displayed time and date on the home screen.
NOTE: If the Home Display Text Message feature is enabled, Home Mode Display Text
may cover time and date, depending on the Configurable Idle Screen settings. Infrastructure
synchronizes the time and date. When not within the infrastructure signal range you can set the
values manually.
4.10.9.1

Setting Time and Date on the Display

Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Time & Date→Display.
3 Select one of the following options:
• Time & Date – Your radio displays time and date.
• Time Only – Your radio displays time only. Format Date sub-menu is disabled.
• Date Only – Your radio displays date only. Format Time sub-menu is disabled.
• Off – Your radio does not display time nor date. Format menu is disabled.
4.10.9.2

Setting the Time Format

Prerequisites:If Menu→Setup→Time & Date→Display is set to Time & Date or Time Only.
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Time & Date→Format→Format Time.
3 Select one of the following options:
• 12-Hour – Displays the time with am (before noon) or pm (after noon) indication.
• 24-Hour – Displays the time in 24 hour format.
4.10.9.3

Setting the Time Manually

When and where to use:If the time cannot update automatically through the infrastructure.
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Time & Date→Set→Set Time.
3 Enter current time using Navigation keys or keypad.
4 Press Done.
MN005826A01-AE
Chapter 4 : Main Menu
113