Pepperl+Fuchs DA6-SSI/A-U Manual page 2

DA6-SSI/A-U
 This manual is an essential part of the unit and contains important hints about
function, correct handling and commissioning. Non-observance can result in
damage to the unit or the machine or even in injury to persons using the
equipment!
 The unit must only be installed, connected and activated by a qualified electrician
 It is a must to observe all general and also all country-specific and application-
specific safety standards
 When this unit is used with applications where failure or maloperation could cause
damage to a machine or hazard to the operating staff, it is indispensable to meet
effective precautions in order to avoid such consequences
 Regarding installation, wiring, environmental conditions, screening of cables and
earthing, you must follow the general standards of industrial automation industry
 - Errors and omissions excepted –
General instructions for cabling, screening and grounding can be found in the
SUPPORT section of our website http://www.pepperl-fuchs.com
Version:
03b /af/hk//Feb 08
07a = 08a/kk/hk/Apr.09
09a/kk/hk/Feb.10
10a/kk/hk/June.10
IX34510a_e.doc / Apr-11
Safety Instructions
Description:
Range of PM z- e Fra o c p t o o r s , iS t iS o n I and preselection mode
1 / 2 increase to [-199999, 999999];
load on the current output max. 300 Ohm
Extensions: Linearization, Activation of serial transmission
Extension from 25 to 32 bits
Missing encoder alarm, remote start of serial string
Page 2 / 43