Maintenance - Lantech QL-400 Manual

7.0

Maintenance

Note: Illustrations are for reference only.
Note: Functions, descriptions and data can be different on your machine. Refer to section 3 for options.
Note: Some machines have a remote Emergency Stop. It is important to know the location of all E-stops
before you operate the machine.
Note: Make sure that only qualified personnel complete the steps for Installation, Maintenance and
Troubleshooting.
WARNING
Obey all Lockout/Tagout procedures before you change, adjust, repair a part.
WARNING
Obey all safety decal instructions and warnings.
WARNING
Do not make a change to this machine without approval from Lantech. It can
cause a safety hazard and cancel the warranty.
WARNING
Obey all safety procedures. You must apply the power to the machine for
some electrical adjustments.
WARNING
Do not use this machine with hazardous materials.
Do not operate this machine in a hazardous environment.
Do not operate this machine in an explosive environment.
CAUTION
Do not use a sharp object to remove the film that is wound onto the pre-stretch
roller. It can cause damage to the roller.
CAUTION
Do not let a heavy load stay on the turntable for a long period of time. This can
cause damage to the Urethane Ring.
CAUTION
Obey the torque specifications to prevent damage to the fasteners. Too much
torque can cause the fasteners to loosen.
CAUTION
The Load Height Sensor is a Class 1 Laser. Do not stare into the Laser Beam
MAINTENANCE
69