Controls - Lantech QL-400 Manual

OPERATOR INSTRUCTIONS
6.4

Controls

The Operator Controls are on the side of the mast.
Main Disconnect
This is a lockable switch that starts and stops the main power
supply.
HMI
The standard HMI is a touch screen.
Reset (//)
This blue illuminated button controls the power to the machine.
The button illuminates and all functions are available to the
operator.
Emergency Stop (E-stop)
This red button disengages the control power to the machine.
1. Push the E-stop to stop the machine in an emergency condition.
2. Reset the E-stop before you push the "Reset" button.
32