Kogan KAWNDBIDETB User Manual page 6

• Close the angle valve when water leaking
• When room temperature is below 0°C, to avoid piping or soft hose damage, anti-freezing
measures should be adopted. If water Inlet soft hose is frozen it may destroy main body or
piping, leading to water leakage. To avoid damage, please pay attention to room
temperature adjustment.
• When not in use for a long time, drain the inlet soft hose and disconnect from power.
When next using, open the angle valve and let water connect first, or it may cause skin
inflammation due to poor water quality. It may cause fire or overheating if the power
supply is always connected.
• Confirm that the filter is screwed to correct position installed, prior to using. It may cause
water leakage if not screwed tight.
• When the toilet drain outlet is blocked, cut off the power then clean the obstruction,
otherwise sewage may overflow, causing indoor water seepage because of auto flush
function.
• Flush the toilet after each use. Failure to do so may result in difficulty cleaning the toilet,
blocked drain outlet or sewage overflow, resulting in indoor water seepage.
• After each use, if there is any mess on floor, always clean immediately to prevent corrosion
or unhygienic build-up.
• Extended heating without sufficient water supply will lead to the heater becoming burned.