Kogan KAWNDBIDETB User Manual page 4

Smart wash & dry electric bidet toilet seat
Table of Contents

Advertisement

• If the product is not working, stop using immediately.
Under the following conditions, immediately disconnect the power supply and turn
off the water angle valve:
-
Water leakage from pipe or inside of the product
-
Crack or damage on the product
-
Unusual sound or smell
-
Smoke
-
Unusual heating
-
Block
-
Fall out of the cushion
The continued used of the product, by ignoring the above faults, may result in fire,
electric shock, heat, short circuit, injury and indoor water seepage.
• Do not use any type of water except tap water or drinkable well water (underground
water). Do not use seawater. Use of other waters may cause skin inflammation or fault.
• Do not touch the electrical plug during thunder, as it may cause electric shock.
• Do not let the water inlet soft pipe connect to the electrical plug and outlet, as it may
cause fire, electric shock, heat, short circuit because of moisture condensation.
• Do not destroy or damage the power cable or plug.
• Do not damage, strike, yank, twist, excessively bend, bind, pinch or in any way alter the
electrical cords. Do not place anything heavy on the cords. Failure to follow this instruction
may cause fire, electric shock, heat and short circuiting.
• Do not use a loose or faulty electrical outlet or it may cause fire or short circuit.
• Do not use any power supply other than AC 220V, 50Hz.
• Do not place fingers or anything else into the warm air outlet, and do not place objects or
clothes on the air outlet or cover it. Failure to follow this may cause scalding, electric shock
or fire damage to accessories.
• Keep open flames (matches, cigarettes, etc) away from the product at all times, as it may
cause fire.
• The toilet seat will only function when the seating sensor on the seat ring detects that
there is a person seated (you will hear a beep sound when seated).
Caution:
• Pay attention to low temperature scalding.
Improper use of the seat warmer may cause low temp scalding. If sitting for a long
time, turn the temp setting to "off".
Turn the seat temp setting to "off', and warm air-dry temp to "low", under following
conditions:
-
Being used by children, older people, or people who cannot adjust the
temperature settings.
-
People with disabilities who may be unable to adjust the temperature settings.
-
People who have taken medicine causing drowsiness (cold medication,
sleeping pills, etc), under the effects of alcohol, or are otherwise inebriated.
• As this is an electrical product, do not install it in a location where it can easily get wet or a
location with high humidity. If installed in bathroom, please also install ventilator to
maintain the bathroom ventilation. Failure to do so may cause fire or electric shock.
• Do not install close to a bathtub.

Advertisement

Table of Contents
loading

Table of Contents