Table of Contents
Advertisement
INSTALLATION OF THE BRACKET ONTO THE TV-100 VENTILATOR
1. The Bracket Pro Serie 101 is designed to be
installed on the TV-100 ventilator.
2. Using a Phillips Screwdriver, remove the metal
plate located on the back of the ventilator by
removing all 4 screws. It will not be used for this
assembly. Store for future use.
3. Remove the power supply.
4. To remove the power supply, push on the lever
and slide sideways to the right.
5. Once these components are removed, the TV-
100 is ready to be installed into the bracket.
www.technimount.com
Installation Guide
BP101 UG 202111-01
Return To Table of Contents
17
Advertisement
Table of Contents
