Table of Contents
Advertisement
REMOVING THE PACKAGING FOR INSTALLATION
1. Unpack boxes and check all items.
2. Ensure that all shipping and packaging materials have been properly removed from the product(s) prior to
installation.
3. Identify all of the product components and hardware prior to starting the installation.
4. The Bracket System must work properly before being put into service.
5. Refer to the identification of components at the beginning of this user guide if needed.
TOOLS REQUIRED FOR INSTALLATION
Below is the basic tool required for installation. If you have any questions regarding the installation, or need assistance,
please contact our Technical Support team at
9 Phillips screwdriver
NOTE
9 Electrical tools are not recommended, as there is a potential risk of damage to the threads.
9 Technimount provides screws with scotchgrip for the installation of the Back Plates and main assembly.
Return To Table of Contents
16
Installation Guide
techsupport@technimount.com
BP101 UG 202111-01
www.technimount.com
Advertisement
Table of Contents
