Storing Measurements To A Usb Flash Drive - Tektronix KEITHLEY SourceMeter 2450 User Manual

Section 2: Using the front-panel interface

Storing measurements to a USB flash drive

You can export the measurement data from the Model 2450 to a USB flash drive. The information is
saved in the .csv file format.
To store measurement data:
1. Insert a flash drive into the front-panel USB port.
2. Press the MENU key.
3. In the Measure column, select Data Buffers.
4. Select the buffer that you want to save.
5. Select Save to USB.
6. Enter a name for the new file, and then select the ENTER key on the displayed keyboard.
7. Select Yes to confirm saving the file.
2-8
Model 2450 Interactive SourceMeter® Instrument User's Manual
2450-900-01 Rev. A / June 2013