U-Locate Transmitter; Transmitter Features; Battery Replacement; Replacing Batteries - SPX Radiodetection Schonstedt u-LOCATE User Manual

u-LOCATE transmitter

Transmitter features

1. On/Offbutton.
PresstoswitchOnandOff.Hold
down when switching on to reduce
volume.
2. Signal Boost Button.
Press to boost locate signal strength;
press again to return to standard
power. Transmitter starts-up in
standard signal strength mode.
3. Signal Boost LED.
LED lit when high signal strength
power level selected. Flashing LED
indicates low battery level.
4. Accessory socket.
For connection of Direct Connect
Leads , Clamp, Live plug Connector
and /or Flexitrace™
5. Loudspeaker.
6. Battery compartment.
7. Accessory storage compartment. To
store Direct Connect Leads, extension
cable, magnet and Ground Stake
8. HighlyreflectiveCLASS2safety
labels.

Battery replacement

Toreplacethebatteries,turnthetransmitteroff,opentheaccesscoverusinga
screwdriver or coin. Use four LR20 (D-cell) alkaline or NIMH rechargeable batteries.

Replacing batteries

Donotmixnewandoldbatteriesordifferenttypesofbatteries,asthismaycause
them to overheat.
2
4
7
2 3
13
3
1
6
5
1
8