Additional Accessories And Software - Basler CXP-12 Quick Install Manual

For information about how to operate the Basler boost CXP-12 camera and
the Basler CXP-12 interface card, refer to the Basler Product Documentation
available at: docs.baslerweb.com

Additional Accessories and Software

Basler offers the following accessories that allow you to quickly get started
with your Basler boost CXP-12 camera:

CoaXPress 2.0 data cable, Micro-BNC x2 (HD-BNC), 3 m, 5 m, 10 m

Power-I/O cable M8 6p/open, 5 m, 10 m

Heat sink with mounting screws (M4x12)

Mount with mounting screws (M2.5x6), C-mount, F-mount, M42-mount

Power supply 18 W, M8 6p
These products can be purchased individually. Alternatively, you can
purchase the Basler CXP-12 Evaluation Kit boost, which includes a camera,
an interface card, and the accessories listed above apart from the power
supply.
For more information, visit www.baslerweb.com/boost.
The pylon Camera Software Suite (version 6.2 or higher) provides an SDK
for the camera and the interface card. Download the pylon Camera Software
Suite at: www.baslerweb.com/pylon
INTRODUCTION
5
EN
ZH
JA