Adaptec 5405 User Manual page 79

To configure the MaxIQ cache pool:
1
In the Logical Devices View, click the Configure MaxIQ Cache Pool button.
The Configure MaxIQ cache pool window opens.
2
Select one or more SSDs in the Available SSDs list, then click SSD > .
The SSD is added to the MaxIQ cache pool and the icon changes to indicate that it's
part of the cache.
To remove an SSD from the cache, select one or more SSDs from the MaxIQ Cache Pool
list, then click < Cache. The icon changes to indicate that the SSD is Ready.
3
Select the MaxIQ cache fetch rate from the drop-down list: Low, Medium, High. (The
default is Medium.)
4
Click Apply.
The Configure MaxIQ cache pool window closes and the cache configuration is saved.
To enable/disable the MaxIQ cache for a logical drive:
1
In the Logical Devices View, select a logical drive.
2
In the menu bar, select Actions, click Configure MaxIQ, then select Enable MaxIQ
Caching or Disable MaxIQ Caching.
Chapter 6: Modifying Your Direct Attached Storage
79
●