About The Adaptec Raid 5445 - Adaptec 51645 Installation And User Manual

About the Adaptec RAID 5445

The Adaptec RAID 5445 is a SAS RAID controller with these features:
External mini-
SAS connector
CN1
Mounting bracket
Form Factor
Bus compatibility
PCIe bus width
PCIe bus speed
Phys (Unified Serial Ports)
Standard cache
Connectors
Maximum number of disk drives
Enclosure Support
Onboard speaker
Battery Backup Module
Chapter 3: About Your RAID Controller
Drive Activity CN1/CN0
Status CN1/CN0
Mode 0 Flash connector
Ext. Alarm
Audible Alarm
Aggregate
I2C connector for CN0
Activity
PCIe x8 connector
Low-profile MD2
PCIe
x8
2.5 Gb/s
8
512 MB DDR2
1 mini-SAS x4 (SFF-8087) internal
1 mini-SAS x4 (SFF-8088) external
8 direct-attached (or up to 256 with expanders)
I2C and SGPIO
Yes
Adaptec Battery Module 800/800T (sold separately—see
page 17)
20
●
Diagnostic LEDs
(back of card)
Internal mini-SAS
connector CN0
ABM-800
connector