Basic Installation Steps
This section describes the installation process. Follow the steps for the installation option
you've chosen.
Installing with an Operating System
Install and connect your controller and internal disk drives (see
1
If your controller has an external connector, you can connect external disk drives as well
(or instead).
Set the boot controller (see
2
Create a bootable array (see
3
Install your operating system and the controller driver (see
4
Install Adaptec Storage Manager and begin to manage your data storage (see
5
Installing on an Existing Operating System
Install and connect your controller and internal disk drives (see
1
If your controller has an external connector, you can connect external disk drives as well
(or instead).
Install the controller driver (see
2
Install Adaptec Storage Manager and begin to manage your data storage (see
3
page
44).
page
44).
page
54).
Chapter 4: Getting Started
page
35).
page
48.)
page
page
35).
page
34
●
59).
59).