Adaptec 29320LP-R Manual page 7

Plug the nonterminated end of the cable(s) to the internal
S 2
TEP
LVD/SE connector.
Plug the internal Ultra320/160 and Ultra2 SCSI devices to the
S 3
TEP
other cable connectors, starting with the connector at the
terminated end of the cable.
Plug first device
to this connector
N
OTE
from the factory with termination disabled and cannot be
changed. Proper termination is provided by the terminator at
the end of the LVD SCSI cable.
Ultra320/160 or Ultra2
SCSI devices
Built-in terminator
on cable
Internal Ultra320/160 and Ultra2 SCSI devices come
6