Adaptec 29320LP-R Manual page 3

I
NSTALLING THE
Discharge any static electricity build-up before handling your
S 1
TEP
SCSI card by touching a grounded metal object (like the exposed
metal parts on the back of your computer).
W
ARNING
power cord.
After you turn off your computer and unplug the power cord,
S 2
TEP
remove the cover from the computer.
Locate an unused 64-bit PCI/PCI-X expansion slot and remove
S 3
TEP
the expansion slot cover. If the computer does not have a 64-bit
slot, you can install the card in a 32-bit PCI slot. The Adaptec
SCSI Card 29320LP supports both 5V and 3.3V 64-bit slots. (The
expansion slot must be compliant with PCI Rev. 2.1 or PCI-X
Rev. 1.0 and must support Bus Mastering.) Save the slot cover
screw for use in Step 4.
Slot cover
screw
Expansion
slot cover
A
DAPTEC
Turn OFF power to the computer and disconnect the
2
SCSI C
ARD
29320LP
64-bit PCI slot
32-bit PCI slot