Table of Contents
Advertisement
COMPONENT OVERVIEW
The frame is constructed from 80mm x 40mm galvanised steel channel, similar to that used in domestic steel
house framing. All sections are cut to exact lengths, with channel ends pre-punched where necessary to simplify
assembly.
Channel sections are secured together using 10G self drilling tek screws (supplied). Roof sheets are secured
to the frame using 10G x self drilling tek screws with neoprene washers (supplied). Barge capping is secured
together using 3mm pop rivets (supplied).
Absco Industries
Assembly Instruction Manual
ABSCO GARAGE
MODEL: RG37601N2
3.7m W x 6.0m D x 3.2m H
Sheeting
Page 21
Rear Frame
Page 10
Model: RG37601N2
Front Frame
Page 12
Internal Frames
Page 11
31/08/20
8
Advertisement
Table of Contents
