Table of Contents
Advertisement
COMPONENT OVERVIEW
The frame is constructed from 80mm x 40mm galvanised steel channel, similar to that used in domestic steel
house framing. All sections are cut to exact lengths, with channel ends pre-punched where necessary to simplify
assembly.
Channel sections are secured together using 10G self drilling tek screws (supplied). Roof sheets are secured
to the frame using 10G x self drilling tek screws with neoprene washers (supplied). Barge capping is secured
together using 3mm pop rivets (supplied).
Absco Industries
Assembly Instruction Manual
ABSCO GARAGE
MODEL: RG60602N2
6.00mW x 6.00mD x 3.40mH
Sheeting
Page 22
Rear Frame
Page 11
Model: RG60602N2
Front Frame
Page 13
Internal Frames
Page 12
22/10/19
9
Advertisement
Table of Contents
