ABSCO SHEDS RG37601N2 Manual page 10

Rear Frame
• Box these frame sections together.
1 OFF: C3065 + C3065
• Lay the parts out on your slab or another
level area as shown below.
• Check diagonals for squareness, then join all
components together with tek screws. Make
sure FAST014 are used on exterior side.
• Refer to engineering drawing for quantity of
screws required at connection points.
• Double check the dimensions and draw an
outline of the frame onto the ground with
chalk to use as a template for the internal
and front frames.
• Use C0100 box the bottom of the two C2750
as shown.
• Turn the frame over carefully & fix the other
side.
Absco Industries Assembly Instruction Manual
ABSCO GARAGE
MODEL: RG37601N2
3.7m W x 6.0m D x 3.2m H
40
1850
* These dimensions are identical for rear, internal and front frames
ZACO190
M1870
C0100
1850
3700*
Model: RG37601N2
C3065
C3065
C2750
BKT17 4 OFF
31/08/20
K1830
10