Operation - Makita DPT353 Instruction Manual

Nose adapter
CAUTION:
Always make sure that your
the contact element and the battery cartridge is
removed before installing the nose adapter.
adapter, place it over the driver guide cover so that the
driver guide cover.
You can store the nose adapter on the holder on the
Fig.10: 1. Dent 2. Protrusion 3. Nose adapter
4. Holder
Hook
CAUTION:
Do not hang the hook from the
waist belt.
Fig.11
housing on either side and then secure it with a screw.
Fig.12: 1. Groove 2. Hook 3.
When not in use, store the hex wrench as shown in the
Fig.13: 1. Hex wrench

OPERATION

Testing the safety system
WARNING:
Make sure all safety systems are
in working order before operation. Failure to do
Fig.14: 1.
3. Contact element 4.
1.
zine opened.
2.
3. Only pull the switch trigger without touching the
contact element against the material.
4. Only touch the contact element against the mate
rial without pulling the switch trigger.
ately and ask your local service center.
Driving pin nails
driven completely.
1.
2.
3.
4.
the switch trigger once, and then repeat the step 2 and
Fig.15: 1.
You can also drive the pin nails when dragging the
tool to the next area with the contact element pressed
against the material and pulling the switch trigger.
Fig.16
Fig.17
NOTE:
the workpiece even you hold the pin nail head,
Continuing to use the pin nailer on such material may
the contact element and the battery cartridge is
removed before loading the pin nailer.
NOTE:
2. Checking remaining pin nails
through the sight window.
Fig.18: 1.
pin nails.
9 ENGLISH
WARNING:
Continue to place the contact
Release the trigger lock.
2. Contact element
WARNING:
Always make sure that your
2. Indicator
WARNING:
Always make sure that the battery