Functional Description - Makita DPT353 Instruction Manual

battery life
1. Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2. Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3. Charge the battery cartridge with room tem-
a hot battery cartridge cool down before
charging it.
4. Charge the battery cartridge if you do not use
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
Installing or removing battery
cartridge
CAUTION:
Always switch off the tool before
installing or removing of the battery cartridge.
CAUTION:
Hold the tool and the battery car-
cartridge.
Fig.1: 1. Red indicator 2. Button 3. Battery cartridge
it into place. Insert it all the way until it locks in place
CAUTION:
Always install the battery cartridge
fully until the red indicator cannot be seen.
you or someone around you.
CAUTION:
Do not install the battery cartridge
forcibly.
Tool / battery protection system
Overload protection
automatically stops without any indication. In this sit
tool on to restart.
Overheat protection
Overdischarge protection
On
Indicating the remaining battery
capacity
Only for battery cartridges with the indicator
Fig.2: 1. Indicator lamps 2.
Indicator lamps
Lighted Off
NOTE:
7 ENGLISH
Off
Blinking
Remaining
capacity
Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
may have