Makita DPT353 Instruction Manual page 8

Indicating the remaining battery
capacity
When you either pull the switch trigger or push the con
Fig.3: 1. Battery indicator
Battery indicator status
On Off
Trigger-lock button
CAUTION:
Before installing the battery car-
tridge into the tool, always check to see that the
switch trigger actuates properly and returns to
the "OFF" position when released.
CAUTION:
When not operating the tool,
depress the trigger-lock button from B side to
lock the switch trigger in the OFF position.
Fig.4: 1.
Fig.5
WARNING:
Always make sure that your
the contact element and the battery cartridge is
Fig.6: 1.
Fig.7: 1. 2. Flush 3.
Lighting up the lamp
Pull the switch trigger or actuate the contact element to
ing the switch trigger or actuating the contact element.
releasing the switch trigger and the contact element.
Remaining
battery
capacity
Blinking
50% to 100%
20% to 50%
ASSEMBLY
0% to 20%
Charge the
Loading the pin nailer
2.
1.
2.
3.
nails in the right direction.)
4.
place until it clicks.
in reverse.
8 ENGLISH
CAUTION:
Do not look in the light or see the
source of light directly.
Fig.8: 1. Lamp
NOTE:
it may lower the illumination.
NOTE:
CAUTION:
Always make sure that your
the contact element and the battery cartridge is
removed before carrying out any work on the pin
nailer.
CAUTION:
Always make sure that the battery
cartridge is removed before loading the pin nailer.
property damage.
CAUTION:
Do not abruptly slide the magazine
of the pin nailer loaded with pin nails.
dropping pin nails especially when working in high
CAUTION:
Load pin nails in the correct direc-
tion. Loading in wrong direction may cause prema
other parts.
CAUTION:
Do not use deformed connected
pin nails.
Press the locking lever and slide the magazine
Fig.9: 1. Pin nails 2.
4. Driver guide
3. Locking lever