Stop Operation; Other Indications; Check; 1Check Mode 1 - Hisense AFM-54EX4SA Operation Installation Maintenance Manual

5.2 Stop Operation

Press the key
ON/OFF
and the LED lamp will also be off.

5.3 Other Indications

abnormality
If the abnormal situations occur to protective
ON/OFF
detect the cause of abnormality and make
adjustment. Press the ON /OFF key ⑧ or reset
key ⑤ once, the alarm on the wire remote
number of abnormal machine will appear on the
temperature indication zone of the screen. In this
case, consult your local dealer.
Display Every 1s
When the heating turns to the defrosting, the
Defrosting
⑧, system stops running,
Water Module
A ddress &Refrigerant
System
Water Module
T ype C ode
component. If any function not available for
for 5 times.
5.4

CHECK

modes include [
CHECK
[ Mode 2]:
CHECK
CHECK
updated every 30 seconds.
CHECK
alarm and stored in EEPROM.
Mode 1
CHECK
5.4.1
Step 1
Press the key
CHECK
go to water module selection state of the
CHECK mode.
Wate Module
Selection Mode
CHECK
Step 2
Press the
key
CHECK
and go to the communication of [Required
Data Format for
CHECK
display state of the
CHECK
CHECK
Mode 1
Item C ode
CHECK
19
flashes 5 times
Mode 1] and
CHECK
data
④ for 3 seconds and
Water Module
A ddress &Refrigerant
Most Recent
System
④ or wait for 7
seconds,
1], and to the data
1.
Value Displayed