Armc Card Configurations - Acer ARMC User Manual

ARMC Card Configurations

You can left click on the Configuration section button to administer users, configure
network parameters, and perform several other powerful management features. These
functions are divided into six subsections. The following table gives you a brief
description of each. Each subsection is explained in more detail further in this section.
Function
Configure
Administrators
Configure
Network
Parameters
Configure Date
and Time
Update Your
ARMC Card
Configure
SMTP
Configure
Alerts
Select Your
Event Log
Policy
Icon Description
This page allows you to configure the administrators who have
access to the ARMC card.
This page describes the network parameters for the ARMC card.
This page shows the date and time on the ARMC card. You can
also set the ARMC card's date and time by entering appropriate
values in the Set boxes and pressing Sync. For your convenience,
this system's current date and time show up by default in the Set
boxes.
This page allows you to update your ARMC card's firmware using
an upgrade wizard.
The ARMC card uses SMTP to send out E-mail alerts and SNMP
Traps. This page configures the SMTP parameters. The ARMC
card tries the second mail server if it cannot contact the first mail
server. Some SMTP servers also require a valid From Address to
send out mails. You can use the From address fields to specify a
valid address that your mail server will accept.
This page allows you to configure alert recipients. You can also set
the conditions necessary for the alert recipients to receive alerts.
This page allows you to set what happens when the event logs are
full. You can either set up the ARMC card to stop logging events or
roll over the log files.
Chapter Four : Using Your ARMC Card
Cont'd
81