Step 8 Install The Acer-Armc Windows Host Components - Acer ARMC User Manual

Step 8 Install the Acer-ARMC Windows Host Components

Acer-ARMC Windows Host Components is a collection of four ARMC host-side
components. These programs are briefly explained in the following table:
Program Description
ARMC Mouse The ARMC Mouse Booster program allows you to speedup the cursor on the host system
Booster when you use mouse redirection during Console Redirection.
RMConfigApp The RMConfigApp program allows you to configure the ARMC card from the host system or
from a client system.
WinCuri The WinCuri program is a command prompt-based program that you can use to configure the
ARMC card. It allows you all the functionality of both the Internet browser-based Remote
Access Companion for ARMC and the RMConfigApp program.
ARMC Server The ARMC Server Heartbeat is installed as a service in Windows. It is used to tell whether
Heartbeat the operating system on the host system is operating or not. It can also detect whether the
operating system was shutdown normally or abruptly.
Follow the steps outlined in the following table to install the Acer-ARMC Windows Host
Components:
Step Description
1 Insert your ARMC CD into the host system. The host system is the system that has the ARMC card
installed into it. Browse to the following folder and file:
CDROM\HostSide\Win32\Setup.exe
2 Double left click the Setup.exe icon to begin the installation of the Acer-ARMC Windows Host
Component.
3 The Acer-ARMC Windows Host Component setup window opens. Left click the Next button.
Chapter Two : Installing Your ARMC Card
Cont'd
11