Table of Contents
Advertisement
Step 10 Connect to the ARMC from a Client System
In order to connect to the ARMC card, you must access the ARMC from another system
on the same network. This document refers to this other system as the client system. To
do this, you must know the ARMC card's IP address. If you have installed the ARMC on
a network that uses DHCP, you can search the network for the ARMC card. To locate
and find out its IP address, you must install and run RMseek.
Note:
To get or set the IP address on your ARMC card in a Windows 2000/XP environment,
you can also run the RMConfigApp program on the host system. See Appendix B,
WinCuri, LinCuri, and RMConfigApp for more information on how to use the
RMConfigApp program.
Follow the steps in the table below to connect to the ARMC from a client system:
Step
Description
1
On a local network computer, place the ARMC CD into the CD-ROM drive. Locate the RMseek program
on your ARMC CD Disc. It is located in the following directory:
CDROM\RemoteTools\Win32\RMseek.exe
Run the RMseek program by double left clicking on it.
2
Left click on the Next button when you see this screen.
RMSeek.exe
Chapter Two : Installing Your ARMC Card
Cont'd
19
Advertisement
Table of Contents
