Table of Contents
Advertisement
ARMC Card Configurations,
Updating Your ARMC Card's Firmware, Continued
Step
Description
7
Left click the OK button when you see the following dialog box.
8
If the dialog box prompted that an update is necessary, left click the Flash button. If the wizard
determined that no flash is necessary, you can left click the Cancel button.
Note:
Even if you choose to cancel the firmware flash operation, the ARMC card must be reset. This
means that you must close the Internet browser and log back onto the ARMC card before you
can perform any other types of operations.
Note:
You can place a check next to Complete Flash Mode if you want to flash the whole firmware.
You can also select individual modules that you want to flash. If there is not enough space on
the ARMC card's firmware hub, you cannot flash individual modules. You must place a check
next to Complete Flash Mode.
96
Acer Remote Management Card (ARMC) User's Guide
Continued
Cont'd
Advertisement
Table of Contents
