Table of Contents
Advertisement
ARMC Card Configurations,
Updating Your ARMC Card's Firmware, Continued
Step
Description
9
When you see this screen, it means that the firmware image is being upgraded. Once the upgrade's
progress reaches 100%, it is complete. The ARMC card will reset itself. You must close the browser and
reconnect to the ARMC card once this process is complete.
Note: The ARMC card's IP configuration can change as a result of the flash update. This is highly
probable if you have flashed the Configuration section.
10
After the Firmware Upgrade Wizard has been completed successfully, the ARMC card will automatically
reset itself. This is done in order for the image upgrade to take effect. You cannot perform any other
operation within your current Internet browser session
Close your Internet browser session and reconnect to your ARMC card.
Continued
Chapter Four : Using Your ARMC Card
Cont'd
97
Advertisement
Table of Contents
