Ipmi Configuration - Acer ARMC User Manual

Advanced ARMC Card Configurations,
I2C Configuration, Continued
The following table describes the information listed in this subsection in detail:
Item
Current ARMC I2C
Slave Address
New ARMC I2C Slave
Address
Save Button

IPMI Configuration

The IPMI Configuration screen is a subsection of the Advanced group. This page allows
you to perform IPMI configurations on your ARMC card.
The ARMC can use IPMI to communicate with a BMC or any other IPMI compliant
devices connected to the I2C bus. If there is a BMC present, you can configure the
ARMC card to use IPMI to power on and off the host system. You can also use the
BMC's Sensor Data Records (SDR) for health monitoring. This precludes the need to
create or upload an SDK.
102 Acer Remote Management Card (ARMC) User's Guide
Continued
Description
This field displays the current ARMC card's I2C slave address.
This field allows you to change the ARMC card's I2C slave address
so that it does not conflict with the host system or BMC's I2C slave
address.
This button allows you to save your configuration.
Cont'd