Lincuri - Acer ARMC User Manual

WinCuri,
Continued
WinCuri.exe Help File, Continued
Host HeartBeat commands
-----------------------
-HB -GetHB
-HB -SetHB <Heartbeat Time Interval (Seconds)> - <Between 6 and
2147483646>
General purpose commands
-----------------------------
-Gen -Reset -SaveConfig|-NoConfig (Reset ARMC card)
-SaveConfig (Save Configuration)
-NoConfig (Don't save Configuration)
-Gen -fwInfo (Get Firmware Info)
SDK commands
-----------------------
-SDK -uploadSDK <sdkfile.dat>
-SDK -deleteSDK
-SDK -rereadSDK
-SDK -readsensors
Advanced Configuration commands
-----------------------
-ModemCfg -get <dev>
-ModemCfg -set <-s baud> <-i initString> <-p phoneNumber>
-PPPCfg -get
-PPPCfg -set ServerIP ClientIP
-ASRCfg -Get
-ASRCfg -Set ENABLED|DISABLED POWERCYCLE|RESET
Minimum ASR Delay is 240 Seconds
DISABLED does not require extra arguments
Server Information Configuration commands
-----------------------------------------
-Getserverinfo
-Setserverinfo -ServerName <Name> -ServerLocn <Location> -ServerOS <OS> -
ServerDesc <Description>

LinCuri

The LinCuri program is a command prompt-based program that you can use to configure
the ARMC card in RedHat Linux. It allows you all the functionality of both the Internet
browser-based Remote Access Companion for ARMC and the RMConfigApp program.
To run LinCuri, type the following:
./LinCuri -[nw IP username] [cd] <arguments>
Delay
Appendix B : WinCuri, LinCuri, and RMConfigApp 119
Cont'd