Table of Contents
Advertisement
Host Health Information,
Loading an SDK File, Continued
Step
Description
5
Left click the Upload button.
6
Once the SDK file is uploaded, the following screen appears.
Note:
If the reading displays access failed, try the following:
•
If your serverboard does not have or support a BMC, check the ARMC 20-pin cable or the
3-pin or 4-pin IPMB connector to see if the cable is plugged in correctly.
•
The SDK file may be corrupt. Try to upload the SDK file again.
•
The SDK file you uploaded may be for a different motherboard. Make sure you are
uploaded the correct SDK file.
Continued
Chapter Four : Using Your ARMC Card
Cont'd
45
Advertisement
Table of Contents
