Table of Contents
Advertisement
42
Power supply LEDs
The Altos S300 series power supply provides power factor correction,
over current and over voltage protection. The power supply has 853
Watts peak power with 673 Watts continuous power and input
voltage fail detection.
The power supply has two LED indicators, which are visible from the
rear of the enclosure. The green Power OK LED is ON when the power
supply is operating normally. This green LED is controlled by the
power supply, and indicates that the power supply output voltages are
operating normally. The power supply amber Fault LED is controlled
by the Altos S300 series ES block (for information on the ES block refer
to page 36). This amber LED is ON when the ES block detects a power
supply fault, or it will flash when the power supply Locate feature is
1
selected
.
Note: The audible alarm will sound when an error is detected.
The alarm can be muted using the Alarm Mute Button.
1
Power supply 'Locate' is a feature of Spheras Storage Manager software.
4 System monitoring
Fault LED
Power OK
Advertisement
Table of Contents
