Altos S300 Series Scsi Id Assignments - Acer Altos S300 User Manual

Altos S300 series SCSI ID assignments

The SCSI ID's for the Altos S300 series enclosure are hard set and cannot
be changed in any way. The Altos S300 series enclosure has two modes
of operation: Single (Joined) SCSI bus mode (1x14), and Dual (Split) SCSI
bus mode (1x7 and 1x7). The I/O Modules are set at ID 15 in all cases
and SCSI ID 7 is reserved for the host. The figure below shows how the
SCSI ID's are assigned.
Both rear I/O Modules are at SCSI ID 15 in all configurations
Bus B Bus A
Dual (Split)
Bus Mode
Single (Joined)
Bus Mode
19
1
2
3