Table of Contents
Advertisement
2.55
ProtecTor
A new dimension in door screening
Installation and operating manual
12
5. Installation
5.1 Installation site
Before stating installation work, shut off the water line to the (site)
lines to prevent injuries or material damage!
ProtecTor air curtains are available as horizontal and standing versions. The
horizontal version is mounted on the ceiling, while the standing version is
mounted on the wall at the same time as being installed on the floor.
The type, condition and ambient temperature of the installation site for the
Kampmann ProtecTor must be appropriate to the corresponding size.
The installation site must be suitable for permanently supporting the unit
securely and vibration-free.
• Preparatory measures for installation:
• Check the installation site for adequate load-bearing strength and sta-
bility
• Check the required general conditions in the permitted application
area
• Have the necessary auxiliary equipment ready for installation (e.g. lift-
ing tools)
• Make sure that a minimum of two people are available for installation
work
• Wear personal protective gear
• Pay attention to the smallest possible installation distance between the
unit and door to achieve an optimum shielding effect
Important! Danger from electric current / existing pipework!
• Check that there are no electric cables or pipework laid in the area prior
to drilling and creating possible wall and ceiling openings!
• All versions of the unit should be fixed in all installation positions in such
a way that no mechanical distortion or warping arises.
5.2 Installation distances
When mounting the unit, ensure that there is a minimum free intake
distance of 320 mm on all sides above the motor guard. If the minimum
distance is not adhered to, the output of the ProtecTor will be reduced, and
the sound level will rise.
In the event of any restricted free air intake due to constricted installation
sites (e.g. adjacent walls, corridor-like installation spaces), pay attention to
the resulting lower installation height to obtain the required output.
Advertisement
Table of Contents
