CommScope FAC T FRAME Installation Instruction
Fanout fixation kit
Hide thumbs
Also See for FAC T FRAME:
- Installation instructions manual (9 pages) ,
- Installation instruction (8 pages) ,
- Installation instruction (12 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CommScope FAC T FRAME
Summary of Contents for CommScope FAC T FRAME
- Page 1 FAC T FRAME INSTALLATION INSTRUCTION: Fanout Fixation Kit...
- Page 2 Exposure to laser radiation can seriously damage the retina of the eye. Do not look into the ends of any optical fiber. Do not assume the laser power is turned off or that the fiber is disconnected at the other end. Page 2 of 8 860648300 © 2019 CommScope, Inc. All Rights Reserved Rev. B...
- Page 3 Kit Content Fanout Fixation Plate Fanout Retainer Cable Tie M6 Bolt+Washer Page 3 of 8 © 2019 CommScope, Inc. All Rights Reserved...
- Page 4 “fixed side” of the FACT Frame (indicated with an arrow). Two fanout plates can be mounted per frame. Use two M6 screws + M6 Bolt + Washer washers / plate. Page 4 of 8 © 2019 CommScope, Inc. All Rights Reserved...
- Page 5 5. Fanout Retainer - Step 2 Step 2: Take the fanout retainer and the fanout. Position the fanout on the retainer as illustrated. Apply two cable ties to secure the fanout on the bracket. Page 5 of 8 © 2019 CommScope, Inc. All Rights Reserved...
- Page 6 3:Position the assembled retainer in the opening of the fa- nout plate. Slide it down until you hear a “click”. Start in the back. There can be up to 32 assembled brackets / plate. Page 6 of 8 © 2019 CommScope, Inc. All Rights Reserved...
- Page 7 The fanouts that are terminated on the bottom fanout plate should be routed to the bottom 28 Fact elements. Repeat the process for all the fanouts that have to be installed. Page 7 of 8 © 2019 CommScope, Inc. All Rights Reserved...
- Page 8 7. Trade-marks: All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to CommScope products or services. CommScope is committed to the highest standards of business integrity and environmental sustainability, with a number of CommScope’s facilities across the globe...
Need help?
Do you have a question about the FAC T FRAME and is the answer not in the manual?
Questions and answers