Exemption From Liability - Flex PXE 80 10.8-EC Original Operating Instructions

PXE 80 10.8-EC
and Electronic Equipment Regulations and Electronic Equipment Regulations S.I.
2012/3032 and are manufactured in accordance
with the following designated Standards: BS BS
EN 62841-1:2015, BS EN 62841-2-4:2014, BS EN 62841-1:2015, BS EN 62841-2-4:2014, BS
EN 55014-1:2017, BS EN 55014-2:2015 EN 55014-1:2017, BS EN 55014-2:2015
Place of declaration: Steinheim, Germany. Steinheim, Germany.
Responsible person: Peter Lameli, Technical Peter Lameli, Technical
Director – FLEX-Elektrowerkzeuge GmbH Director – FLEX-Elektrowerkzeuge GmbH
Contact details for Great Britain: FLEX Power
Tools Limited, Unit 8 Anglo Office Park, Lincoln
Road, HP 12, 3RH Buckinghamshire, United
Kingdom.
19.05.2021

Exemption from liability

Exemption from liability
The manufacturer and his representative are
not liable for any damage and lost profit due to
interruption in business caused by the product
or by an unusable product. The manufacturer
and his representative are not liable for any
damage which was caused by improper use of
the power tool or by use of the power tool with
products from other manufacturers.
15