Leds - ADF Web HD67E07-A1 User Manual

Industrial Electronic Devices

LEDS:

The device has got seven LEDs that are used to give information about the functioning status.
The various meanings of the LEDs are described in the table below.
LED
1: Device State (green)
2: EtherCAT comm. (green)
3: CAN comm. (green)
4: Error state (green)
5: EtherCAT state (green)
6: Ethernet1 link (green)
ADFweb.com S.r.l.
Normal Mode
Blinks slowly (~1Hz)
It blinks when EtherCAT communication is running
It blinks when a CAN message is received
ON: An error in the communication busses occurs
OFF: No errors are present
OFF: EtherCAT Master not connected
Blinking: EtherCAT Master is connecting
ON: EtherCAT Master is connected
ON: Ethernet cable connected
OFF: Ethernet cable disconnected
User Manual EtherCAT Slave / CAN
Document code: MN67E07_ENG Revision 1.000
Boot Mode
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
ON: Ethernet cable connected
OFF: Ethernet cable disconnected
Page 9 of 29