Appendix A: Eu Declaration Of Conformity - Emerson EL-O-Matic F-Series Safety Manual

Safety Guide
DOC.SG.EF.EN Rev. 2

Appendix A: EU Declaration of Conformity

We hereby declare, that the products specified below meet the basic health and safety requirements of the
below mentioned European Directives..
Product Description :
• EL-O-MATIC F Series - Pneumatic Actuator
Double Acting and Spring Return Actuators
• Double acting types:
• Spring Return types:
Product Variations:
• Product variations of the above mentioned types are still covered by the listed directives and are CE marked.
Serial Number:
• Each Actuator has an identifiable serial number.
EU-Declaration of Conformity
Issued in accordance with the:
Pressure Equipment Directive (PED)
2014/68/EU
• For Gas Group 2 (see Safety Guide DOC.SG.EF.1
section "Operating Media") EL-O-MATIC F Series
pneumatic actuators are excluded from the require-
ments of the Pressure Equipment Directive 2014/68/
EU based on article 1, point 3.6 of the directive.
• For Gas Group 1 pressure media, first consult
engineering to check compatibility of pressure media
with the actuator.
• The below listed limited range of EL-O-MATIC F
Series actuator sizes are rated "Sound-Engineering-
Practice" or Module A (Internal production control)
and are available on request for use with Gas Group
1 media.
• Double acting types: FD 12, 25, 40, 65, 100, 150,
200, 350, 600 or 950
• Single acting types: FS 12, 25, 40, 65, 100, 150,
200, 350, 600 or 950
EU Declaration of Conformity
Issued in accordance with the:
ATEX Directive 2014/34/EU
ATEX Marking:
• II 2G c IIC TX
II 2D c IIIC TX
• For maximum temperature limits and classifications
see Safety Guide: DOC.SG.EF.1 chapter 5, instruc-
tions for use in potentially explosive atmospheres.
Applicable standards:
• EN 13463-1:2009
EN
Legal representative entity for the European Union:
Emerson Process Management, Valve Automation
Asveldweg 11, 7556 BR Hengelo Netherlands
FD 12, 25, 40, 65, 100, 150, 200, 350, 600, 950, 1600, 2500 or 4000
FS 12, 25, 40, 65, 100, 150, 200, 350, 600, 950, 1600, 2500 or 4000
Essential requirements applied and complied with:
• 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.4, 1.3.7, 1.5.2, 1.5.3,
1.5.4, 1.5.7, 1.6.1, 1.7.1, 1.7.3, 1.7.4.
• Technical documentation is drafted in compliance
with Appendix VII, section B.
• Before the actuator is put into operation, the ma-
chine into or onto which the actuator will be installed,
must comply with the stipulations of the machinery
directive.
• The relevant information concerning the machine
or part will be available in the event of a motivated
request from national authorities.
Applicable standards:
• EN ISO 12100:2010
EN 13463-5:2011
Signed :
Name :
Position :
Date :
Place :
Declaration of Incorporation of partly
completed machinery
Issued in accordance with the
Machinery Directive
2006/42/EC, Appendix IIb
_____________________________
S. Ooi
Vice President, Rack & Pinion SBU
& Global Marcom
Emerson Process Management,
Valve Automation
2016-09-09
Houston TX, U.S.A.
EL-O-Matic F-Series
April 2018
ROC no 1500
Rev. 5
EL Matic EL Matic
TM TM
8
EN