Table of Contents
Advertisement
DBC 425
SIP
WITH
FOR
10.5
10.6
75
MX-ONE
Programming the Ring Signal Type
To change the type of ring signal, use the navigation keys to go to the
Settings menu and select the Programmable Keys menu by pressing
the Select key. Press the Line/Hold key and the following menu
appears:
Figure 53:
The current type of ring signal is shown. To change the current type,
press the Change (F3) key and the following menu appears:
Figure 54:
Select the wanted type of ring signal by pressing the Select (F4) key.
Programming the Character of the Ring
Signal
Ring signals are generated in the telephone loudspeaker by a tone
ringer. The selection of one of ten different ringing characters can be
made in the settings mode. Each ringing character corresponds to a digit
between 0 to 9. The following procedure is used:
Use the navigation keys to get to the Settings menu and select the Ring
Character menu:
14/1553-ANF 901 54 Uen E 2009-11-04
Advertisement
Table of Contents
