Table of Contents
Advertisement
5.4
5.5
5.6
14/1553-ANF 901 54 Uen E 2009-11-04
Note: A tone burst is heard each time a participant enters or leaves the
conference. The conversation is changed back to a normal two
party connection when there is only two parties left. When the
conference leader leaves the conference the conference will
continue and the first one to park the conference will be the new
conference leader.
Storing Customer Identity Using Feature
Code
This function allows a customer identity (CID) to be associated to an
external caller by dialing a feature code when an external call is
connected to the extension.
To enter a customer identity when your are in speech with and external
party, do the following:
1)
Park the external party by pressing the Line/Hold key on your tele-
phone, wait for dial tone.
2)
Dial * 77 * wanted customer identity # and press the Call key (dial
tone). The wanted customer identity is a number that can consist of
1 to 20 digits.
Press the Clear key.
3)
You could now either return to the external party by pressing the
access key of the parked call or press the free access key again
and prepare for a transfer of the external party by dialing the
number you want to transfer to.
This feature requires that the monitoring of the extensions is started.
Display of Charging
Note: Not applicable.
Intrusion
Depending on the authorization of your extension there is another option
for getting through to a busy extension. You can use Intrusion which
means that you are connected to the ongoing call after a short tone
burst.
D
C
URING
ALLS
52
Advertisement
Table of Contents
