Kramer Electronics Ltd.
3.22 Remove All Pairings
This command is sent by a client to a device to instruct the device to clear all of its pairings. This
message may be sent to a device that currently has no pairings, but will have no effect.
Byte Offset
+-----------------------------------------+-----------------------------------------+
0 | Magic Number
+
2 |
+-----------------------------------------+-----------------------------------------+
4 | Message ID
+
6 |
+-----------------------------------------+-----------------------------------------+
8 | Protocol Version = 3
+-----------------------------------------+-----------------------------------------+
SwitchableUSB – 3
Supported Messages
| Command = 17
|
+
|
|
+
|
|
30