Kramer Electronics Ltd.
3.7 Pair To Device
Sent by a client to a device to instruct a device to try to pair with a different device specified in this
message. A client must send this message to a ENCODER and a DECODER to instruct them to pair
together, but the order of the two messages does not matter. The device will respond with an
Acknowledge message if it is able to pair with a new device or a Negative Acknowledge message
otherwise. The transmission of the Acknowledge message only indicates that an attempt will be made
to establish a link between the devices, not that a link is already established.
3.7.1 Field Descriptions
Pair To Device MAC Address
Byte Offset
+-----------------------------------------+-----------------------------------------+
0 | Magic Number
+
2 |
+-----------------------------------------+-----------------------------------------+
4 | Message ID
+
6 |
+-----------------------------------------+-----------------------------------------+
8 | Protocol Version = 3
+-----------------------------------------+-----------------------------------------+
10 | Pair To Device MAC Address
+
12 |
+
14 |
+-----------------------------------------+-----------------------------------------+
SwitchableUSB – 3
The MAC address that the client is telling the device to attempt to pair
with.
Supported Messages
| Command = 2
|
+
|
|
+
|
|
|
+
|
+
|
13