Kramer Electronics Ltd.
3.21 Reply Link Status
This message is sent from the device to a client in response to a Request Link Status Information
message. The message will contain information for all 7 devices that could be paired. If the number of
paired devices is less than 7, the unpaired fields are set to 0. Thus, the size of the structure sent
remains the same regardless of the number of paired units.
3.21.1 Field Descriptions
Paired Devices
Link Status
Reserved
Paired With MAC
Address
Byte Offset
+-----------------------------------------+-----------------------------------------+
0 | Magic Number
+
2 |
+-----------------------------------------+-----------------------------------------+
4 | Message ID
+
6 |
+-----------------------------------------+-----------------------------------------+
8 | Protocol Version = 3
+-----------------------------------------+-----------------------------------------+
10 | Link Status of device 1
+-----------------------------------------+-----------------------------------------+
12 | Link Status of device 3
+-----------------------------------------+-----------------------------------------+
14 | Link Status of device 5
+-----------------------------------------+-----------------------------------------+
16 | Link Status of device 7
+-----------------------------------------+-----------------------------------------+
18 | MAC Address of device 1
+
20 |
+
22 |
+-----------------------------------------+-----------------------------------------+
24 | MAC Address of device 2
+
26 |
+
28 |
+-----------------------------------------+-----------------------------------------+
30 | MAC Address of device 3
+
32 |
+
34 |
+-----------------------------------------+-----------------------------------------+
36 | MAC Address of device 4
+
38 |
+
40 |
+-----------------------------------------+-----------------------------------------+
SwitchableUSB – 3
Number of paired devices
The value of this field is set as follows:
Value
0
1
2
This field is reserved by Icron and is set to 0
Each MAC address uses 6 bytes, and will be set to zero if there isn't a device
paired
Supported Messages
Description
Device not paired
Device paired and linked
Device paired but not linked
| Command = 16
| Link Status of device 2
| Link Status of device 4
| Link Status of device 6
| Reserved
|
+
|
|
+
|
|
|
|
|
|
|
+
|
+
|
|
+
|
+
|
|
+
|
+
|
|
+
|
+
|
28