Preventive Maintenance - Batca FZ-10 Owner's Manual

Table of Contents

Batca Fitness Systems strives to give you the very best in quality, performance and safety through carefully engineered designs and

excellent workmanship. In order to maintain this high level of quality the preventative maintenance schedule below should be

followed.

Clean upholstery, grips, and roller pads with mild soap and water generally after every use. The guide rods, chrome slides and frame

should be cleaned with a cotton cloth. Upon cleaning the guide rods, a thin layer of Silicone or Teflon gel should be applied to each

rod to ensure a glass smooth performance.

An overall inspection should be done before each workout. If the warning and safety decals are worn or have been removed they

should be replaced immediately. The cables and cable systems should be inspected for signs of wear and proper tension. In order to

check cables properly you should carefully run the cable through your fingertips, checking for signs of wear, cracks, burs and thinning

spots. Replace any part at first signs of wear. Cables should be adjusted for proper tension. See assembly instructions for this

detail. All hardware, stops, and adjustments should be checked and tightened as required.

The guide rods on your machine should be cleaned and lubricated regularly. This will ensure a glass smooth performance from your

weight stack. A thin layer of either Silicone or Teflon gel should applied to each rod. Each pillow block bearing and flange bearing

has a grease fittings that must be lubricated regularly. Use general purpose bearing grease and follow the schedule below.

Although cables should be inspected daily, it is important that ALL cables be replaced as directed in the schedule below. Please note

that at any first sign of wear the cable should be replaced immediately.

If there are any questions concerning maintenance, please contact your local Batca dealer or contact Batca Fitness Systems directly

at:

Clean

Upholstery

Hand Grips

Roller Pads

Guide Rods

Chrome Slides

Frame

Inspect

Overall

Safety Decals

Cables

Cable Tension

Pulleys

Hardware

Stops

Upholstery

Hand Grips

Frame

Bushings

Bearings

Lubricate

Guide Rods

Bearings

Replace

Cables

www.batcafitness.com