Setting Dtmf Autodialer Tx Delay Time - Yaesu FTM-3200DE Advance Manual

Setting DTMF Autodialer TX delay time

A longer delay may be set between the time the transmitter is keyed and the first DTMF
digit is sent:
1. Press and hold in the [ MHz ( SETUP )] key for
one second to enter the Set mode.
2. Rotate the DIAL knob to select "DT DELAY
15".
3. Press the [ MHz ( SETUP )] key momentarily,
and then rotate the DIAL knob to select the
desired delay time (50 MS / 250 MS / 450
MS / 750 MS / 1000 MS).
Default: 450 MS
4. Press and hold in the [ MHz ( SETUP )] key for
one second to save the new setting and exit
to normal operation.
FTM-3200DR/DE Advance Manual
Advanced Operation
VOL
SQL REV D/A M H z V / M
TXPO D W SETUP M W
DIAL
13