Table of Contents
Advertisement
Interfaces
default USB Host connection to the recovery port:
Note
If J36 is closed, then the USB1 bus of the CPU is forced to be connected to the recovery
connector J35.
Communication
Gigabit Ethernet
One 10Base-T/100Bae-Tx/1000Base-T Ethernet interface is fully integrated in the board through the
AR8031 Ethernet PHY. The bus is accessible through a RJ-45 connector with integrated link/activity
LEDs, as specified in the following table:
Green LED Yellow LED
ON
OFF
BLINK
OFF
ON
ON
BLINK
ON
RS-485
The development board supports one RS-485 half-duplex bus, available on an expansion connector
(J26):
ConnectCore 8M Mini Development Board Reference Manual
Link/activity status
10M/100M Link
10M/100M Active
1000M Link
1000M Active
Communication
16
Advertisement
Table of Contents
Need help?
Do you have a question about the ConnectCore 8M Mini and is the answer not in the manual?
Questions and answers